• About Us
  • Certs
  • Events & Updates
  • Contact

Signature Products

OnWax

Indorez®
CAS NO. 64742-16-1

Applications

Indorez® C5 Hydrocarbon Resin

Resins are a solid or highly viscous substance that is hydrophobic in nature. Resins can be of plant or synthetic origin; the former are secreted by plants and are usually transparent yellow to brown in color, whereas the latter are a hydrocarbon byproduct and are typically a mixture of organic compounds that can be converted into polymers. Their industry use is wide and well developed. Typically, they are used in the production of plastics, as well as lacquers and varnishes and are divided into two main categories: thermoplastic resins, which can be reshaped once melted; and thermosetting resins which become insoluble and infusible upon heating.

INDOREZ® C5 Hydrocarbon Resin – HMRM is a C5 aromatic hydrocarbon resin with wide industrial applications for plastics, thermoplastics, paints and adhesives. This product is on par with industry specifications and of high grade and quality. Listed in the table below are typical industrial applications for INDOREZ® C5 Hydrocarbon Resin, Grade – HMRM.

Introduction

INDOREZ® is pale yellow C5 aliphatic hydrocarbon resin having excellent color, flow, heat stability and thus highly recommended for Hot Melt Road Marking paints.

This resin shows outstanding affinity for pigments and superior processability in the Hot Melt Road Marking Paints Application.

Industry Application
Thermoplastic Paints Hot Melt Road Marking Compounds
Rubber Production Tackifiers and Modified Wax Compounds
Plastic Production Master Batches and Non-woven product assembly
Tapes and Labels Non-woven product assembly, Pressure sensitive additive, Tackifier
Test Unit Specifications
Appearance - Water White Granules
Color Hazen Max 50
Specific Gravity (20/20 °C) - 1.08
Softening Point (Ring and Ball) °C 100 – 110
Ash content % Max 0.1
Acid value mg KOH/g Max 0.1
Color Stability @ 200 °C, 5Hrs Ga# < 1
Melt Viscosity BRF, @160 °C Cps 160 – 240
Methyl Ethyl Ketone - 3 – 4
Xylene - 3 – 4
Mineral Spirits - 5

Applications

• Glued stick adhesive
• Hot Melt pressure sensitive Adhesive

Storage

Storage under normal conditions and quick processing of open bags is recommended.

Packaging

25 Kgs net PP woven bag inner PE bag/ 25kgs net Kraft paper bag/ 500 Kgs net bulk bag.

Indorez® C2 Hydrocarbon Resin
(C5 Hydrogenated Resin)

INDOREZ® C5 Hydrogenated Hydrocarbon Resin is made from mixed aromatic/aliphatic resins which undergo the process of hydrogenation to make them suited for a wide range of applications such as adhesives and tackifiers, hotmelt marking compounds and petroleum wax components in rubber manufacturing. Controlling the process of hydrogenation determines the exact aromatic/aliphatic balance of the product which then determines its application. INDOREZ® C2 Hydrocarbon Resin has an initial water-white color, excellent thermal stability and broad product compatibility. It is also used as an additive to improve wellbore stability within the oil and gas sector where during the well drilling process it is added to improve filter cake, provide lubricity or stop lost circulation and prevent drainage. Listed below are some of the industry uses for INDOREZ® C2 Hydrocarbon Resin (C5 Hydrogenated Resin).

Introduction

INDOREZ® H2 Hydrocarbon Resin is water-white thermoplastic resin obtained from polymerization and hydrogenation of cyclic ingredients. The major usages are tackifier for hot melt adhesive (HMA), hot melt pressure sensitive adhesive (HMPSA) and solvent based pressure sensitive adhesive (SBPSA), because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate (EVA), styrene block copolymer(SBC).

Industry Application
Oil and Gas Additives to improve wellbore stability and prevent drainage. Secondary annular barrier for disposal wells, used for remediation of water or gas leaks
Thermoplastic Industry Hot Melt Road Marking Compound, Hot Melts based on Amorphous Polyolefin
Adhesives and Tackifiers Polyethylene Based Packaging Adhesives, SIS Based Hot Melt Non-Woven Assembly Adhesives
Rubber Manufacturing Petroleum wax compounds
Food Packaging EVA Based Packaging Adhesives using EVA with less than 28% VA content
Test Unit Specifications
Appearance - Water White Granules
Color Hazen Max 50
Specific Gravity (20/20 °C) - 1.08
Softening Point (Ring and Ball) °C 100 – 110
Ash content % Max 0.1
Acid value mg KOH/g Max 0.1
Color Stability @ 200 °C, 5Hrs Ga# < 1
Melt Viscosity BRF, @160 °C Cps 160 – 240
Residue On 45 Microns Sieve % by Wt Nil

Applications

• Glued stick adhesive
• Hot Melt pressure sensitive Adhesive

Storage

Storage under normal conditions and quick processing of open bags is recommended.

Packaging

25 Kgs net PP woven bag inner PE bag/ 25kgs net Kraft paper bag/ 500 Kgs net bulk bag.

Integrated Chemical Specialties, a division of ITS USA strives to provide our clients with the highest quality, competitively priced product with exceptional customer service and experienced logistical support.

Product Brochure


Can't find what you're looking for? Get in touch.

Disclaimer: The information above is believed to be accurate and represents the best information currently available to us. There are no warranties which extended beyond the information in the TDS. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA warrants this product to conform to its own specifications. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA liability on this warranty is limited to the return of the purchase price of this product. The buyer assumes all risks and liability resulting from the use of this product. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA neither assumes nor authorizes any person to assume for it any other liability in connection with the sale or use of this product. We make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall Integrated Chemical Specialties, a division of Integrated Traffic Systems USA will be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Integrated Chemical Specialties, a division of Integrated Traffic Systems USA has been advised of the possibility of such damages. Request a SDS if needed. Note: Products protected by valid patents are not offered for sale in countries, where the sale of such products constitutes a patent infringement. The Liability for patent infringement is exclusively to be understood as buyer’s risk. Products currently covered by valid US Patents are offered for R&D use in accordance with 35 USC 271(e)+A13(1)

5850 San Felipe St., 5th Floor, Houston TX 77057 | United States | 713-337-0152 | Privacy Policy | Terms and Conditions