• About Us
  • Certs
  • Events & Updates
  • Contact

Signature Products




SEALpro™ 3565 Solvent Based Repellent

Overview • Solvent-based repellent
• Can be used for spray applications
• Fast drying
• Non-VOC wherever t-butyl acetate is exempt (this includes most of the U.S.)
Water Repellency Data: Static water repellency ratings of 6 were found on a wide variety of stone types including granite, marble, Saltillo, travertine, and concrete. The rating scale is 0-6. and untreated substrates had a 0 rating.
Oil Repellency Data: Static oil repellency ratings varied slightly by substrate. Travertine and marble rated a 6, Saltillo rated a 5, and concrete rated a 4. The rating scale is 0-6, and untreated substrates had a 0 rating.
Application Solvent-based repellent treatment for:
• Hard surfaces such as granite, marble, tile, brick, Saltillo, concrete, limestone, slate, etc.
• Fabrics such as nylon, cotton, wool, polyester, polyolefin, etc.
• Leather and upholstery
Technical Information

SEALpro™ 3565 is a solvent based repellent made with acrylic fluoropolymer.

The product provides a repellent barrier on surfaces such as concrete, grout, saltillo, travertine, limestone, granite, marble, and slate.

Both water and oil repellency benefits are provided. It can be u sed in solvent-based penetrating sealers and surface treatments.


Mix well before using. The optimum loading level should be determined for each application and use. In general, SEALpro™ 3565 is used in diluted solutions containing 5 - 10 % of the as-delivered product.

SEALpro™ 3565 may be applied with a saturated brush, roller, or a low pressure type sprayer.

The product is soluble in most polar solvents. In non-polar solvents, alcohol/hydrocarbon mixtures such as isopropyl alcohol/heptane are recommended.

Typical Properties
Test Parameter Specification
Appearance Clear Liquid
Color Colorless to pale amber
Odor Acetate
Active Solids, % 20 to 25
Solvent, % 75 to 80
Density@25°C est. 0.92 g/ml
Boiling Point Approx. 87 - 98°C
Flash Point 4°C (39°F)
Storage • Keep container tightly closed.
• Store in well ventilated location
• Freeze/Thaw stable.
• Store at temperatures below 50°C/122°F.
• Avoid contact with heat, flames, and ingition sources.
• Incompatible with strong oxidizing agents.
Shelf Life 12 months
Packaging and Handling SEALpro™ 3565 is available in:
55 gallon steel, closed-head drums (Net Wt. 400 lbs)
5 gallon pails (Net Wt. 40 lbs)

Refer to the Safety Data Sheet (SDS) for information on the usage, handling, and disposal of this product.

DOT Classification: Flammable Liquid

SEALpro™ 220 Solvent Based Repellent

SEALpro™ 220 is a solvent-based acrylic fluorinated co-polymer that provides a durable, subsurface, transparent, protective barrier against oil and water on porous surfaces such as stone, tile, and grout. It is used in solvent-based penetrating sealers, especially for low-porosity stone, unglazed tile, grout, terra cotta, and other porous surfaces such as concrete and brick. SEALpro™ 220 provides oil and water repellency, stain resistance, and easy stain cleanup

Product Properties
Typical Properties
Test Unit Typical Value
Appearance - Clear, slightly yellow liquid
Active Solids % 35
Solvent (Butyl Acetate) % 65
Density g/ml 0.968
Flash point (closed cup) ºC (ºF) 28 (82)
Boiling Point ºC (ºF) 120 (248)
Cold Storage - Product gels below 0 ºC (32 ºF)
Product is freeze/thaw stable
Solubility - Esters, Ketones, Mineral Spirits
Formulating Information
Typical dilution ratio 4-10%
Spray options# Yes
Main Advantage Versatile, Good penetration
Clay Brick ***
Concrete & Grout ***
Facade Concrete Rendering ***
Granite ***
Lime Stone ***
Marble ***
Saltillo / Terracotta ***
Sand Stone ***
Slate ***
Stain Performance# Best
Note: # initial stain performance and Durability
Suitability Scale ***
Highly Recommended
Applications SEALpro™ 220 is used in diluted solutions containing 1.5- 2.5% active ingredient (4-7% commercial product). The optimum level should be determined for each application.

The product may be applied using a saturated brush, roller, or mop, or a low-pressure garden-type sprayer.

SEALpro™ 220 is soluble in most hydrocarbons (e.g., heptane, white spirits, isoparaffins), esters, ketones, and hydrocarbon/alcohol mixtures (e.g., heptane/isopropyl alcohol).

In non-polar solvents, optimum performance can be achieved with the addition of 5-10% polar, protic solvents such as isopropyl alcohol.

Integrated Chemical Specialties, a division of ITS USA strives to provide our clients with the highest quality, competitively priced product with exceptional customer service and experienced logistical support.

Product Brochure

Can't find what you're looking for? Get in touch.

Disclaimer: The information above is believed to be accurate and represents the best information currently available to us. There are no warranties which extended beyond the information in the TDS. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA warrants this product to conform to its own specifications. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA liability on this warranty is limited to the return of the purchase price of this product. The buyer assumes all risks and liability resulting from the use of this product. Integrated Chemical Specialties, a division of Integrated Traffic Systems USA neither assumes nor authorizes any person to assume for it any other liability in connection with the sale or use of this product. We make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall Integrated Chemical Specialties, a division of Integrated Traffic Systems USA will be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Integrated Chemical Specialties, a division of Integrated Traffic Systems USA has been advised of the possibility of such damages. Request a SDS if needed. Note: Products protected by valid patents are not offered for sale in countries, where the sale of such products constitutes a patent infringement. The Liability for patent infringement is exclusively to be understood as buyer’s risk. Products currently covered by valid US Patents are offered for R&D use in accordance with 35 USC 271(e)+A13(1)

5850 San Felipe St., 5th Floor, Houston TX 77057 | United States | 713-337-0152 | Privacy Policy | Terms and Conditions